How To Block Websites Without Software

Steps:

1] Browse C:\WINDOWS\system32\drivers\etc
2] Find the file named "HOSTS"
3] Open it in notepad
4] Under "127.0.0.1 localhost" Add 127.0.0.2 www.sitenameyouwantblocked.com , and that site will no longer be accessable.
5] Done!

-So-

127.0.0.1 localhost
127.0.0.2 www.blockedsite.com

-->www.blockedsite.com is now unaccessable<--


For every site after that you want to add, just add "1" to the last number in the internal ip (127.0.0.2) and then the addy like before.

IE: 127.0.0.3 www.blablabla.com
127.0.0.4 www.blablabla.com
127.0.0.5 www.blablabla.com

etc.

Get unlimited bandwidth from your host for free

NOTE: This applies only to specific hosting companies, due to the
specific setup needed and does have its drawbacks.

While setting up hosting space with a specific company I often deal
with, I noticed that they used a shared IP. (IP shared by two or more
websites/domains.) Well, the rates for unlimited bandwidth were
around $50+ per month, which I found unreasonable. I didnt require
much space, and didnt want to be limited to a mere 3 gig of traffic
per month.

Back on track... When setting up the acct, the hosting company needs
to know the domain name so that they can direct it accordingly.
(example: 'http://www.123.4.567.890/~user1/ ,
'http://www.123.4.567.890/~user2/ etc)

At this point you can give a url that doesnt belong to you at all. As
long as the nameservers dont change, that should have absolutly no
negative effects on you or your site whatsoever.

How it works is this:
The host propogates you a certain amount space on its servers, and
monitors the traffic that enters their space through the domain its
registered under. Being that the domain isn't connected to the site
at all, it registers ZERO traffic.

Zero traffic registered = can't possibly go over bandwidth
restrictions
can't possibly go over bandwidth restrictions = free unlimited
bandwidth

Now the problems with this (besides the ethical ones) is that your
host may offer X amount of mail addys with the acct
(you@y...) and these will not work, as the name isnt on their
DNS. However, some domain companies allow you to set it up
regardless. Another problem seems to be strictly cosmetic, but can be
highly problematic... Once you attach the domain you want onto the
site, each page comes up/w the ip/UN the host propagated to your
acct. Its at this point where you have to have a phenominal 10-15
character alphanumerical or better (#, &, etc) pw, or your site will
be vulnerable to attack since the attacker already has your UN. This
only gives attackers a slight advantage as the amount of time it
would take to brute force a 10 character pw @ a rate of 1,000,000 per
second is 10 years. Add numbers and case sensitivity to that and it
becomes approx 26,980 years.

While I'm on it, I may as well add that if you use this method,
obviously you are going to be using the lowest cost hosting plan
available, which in turn will offer the least amount of space. Thats
why free hosts were invented.

Free hosts suck as a general rule. Who wants a site smothered in ads?
However, if you upload all your programs, graphics and other large
files (have a backup of course) to a reliable free host and target
them accordingly from your site you have just freed up a signifigant
amount of space. The only setback/w this is having to keep an index
card or file around/w your pws, as you should never use the same one
twice, and want to use complicated ones.

How to Find EVERYTHING uploaded on Rapidshare

All rapidshare.de Downloads:
/http://www.google.com/search?hl=en&lr=&as_qdr=all&q=+.*+site%3Arapidshare.de

Apps Rapidshare.de Downloads:
/http://www.google.com/search?hl=en&lr=&as_qdr=all&q=.cab+OR+.exe+OR+.rar+OR+.zip+site%3Arapidshare.de&btnG=Search

Movies rapidshare.de Downloads:
/http://www.google.com/search?hl=en&lr=&as_qdr=all&q=+.Avi+OR+.mpg+OR+.mpeg+site%3Arapidshare.de&btnG=Search

Hide Drives and Partitions

Do you have data on a partition or hard drive that you don't want tampered with or easily accessible to other users? Well, you can hide any drive/partition in Windows XP, NT, and 2000. That means that they won't show up in Explorer or My Computer.

If you want access to that drive from your user account you should create a desktop shortcut before proceeding. Once hidden, you can still access by typing the drive letter and a colon in Start/Run—for example, "D:" will bring up a folder of the contents on your D drive.

The easiest way with Win XP is to use the TweakUI power toy from Mcft. Go to Start/Run and type in "tweakui" (without the quotes).

Go to My Computer/Drives and uncheck the drive/partition(s) you want hidden. Click "Apply" or "OK" when finished.

If you have XP but not Tweak UI you can download it here...
http://www.Mcft.com/windowsxp/downloads/powertoys/xppowertoys.mspx

For Win NT, 2000, and XP you can use the following Registry edit:

*Be sure to back up the Registry before proceeding
http://www.worldstart.com/tips/tips.php/401

Open the Registry Editor by going to Start/Run and typing in "regedit" (without the quotes). Find your way to...

HKEY_CURRENT_USER\Software\Mcft\Windows\CurrentVersion\Policies

Click on "Explorer".

Double-click the "NoDrives" key in the right column. If you don't find a "NoDrives" registry key, just right-click in the right pane and choose "New/DWORD Value" then name the key "NoDrives".

You'll see a value like "0000 00 00 00 00". This is where the fun starts. The four sets of double zeros (after the "0000") are where you'll enter the values for the drive/partitions. Now, stay with me on this—it's not as complicated as it sounds:

The first column is for drives A-H, the second for I-P, the third for Q-X, and the fourth for Y-Z.

The values for each drive are as follows:

1 - A I Q Y
2 - B J R Z
4 - C K S
8 - D L T
16 - E M U
32 - F N V
64 - G O W
80 - H P X

So, let's say you want to hide drive D. In the first column you would put "08". For drive K you would put "04" in the second column.

But what if you want to hide more than one drive in a column? Simply add the values together: D+E = 8+16 = 24. So in the first column you would put "24".

Still baffled? If you have XP then go get TweakUI and save yourself the math.

Whichever method you use, you can rest easy knowing that the files on that drive or partition are less accessible to other users.

Free Access To Websites Without Registering

Go to

-http://bugmenot.com/

and type the URL of the website you want to log into.
Examples:

-http://www.nytimes.com/, -http://www.winnetmag.com/
etcetera.

Another (and better) way is changing the user agent of your browser to:
Googlebot/2.1+

-http://www.googlebot.com/bot.html

This is very easy in Mozilla's Firefox. Download and install the User Agent Switcher from

-http://www.chrispederick.com/work/firefox/useragentswitcher/
and add the Googlebot user agent.

Have fun, Dead Dreamer!

-]Edit[- Now this kicks ass, was just browsing entire forum without even needing to login to view restricted areas, and it works on other sites
And no, you cant access the hidden forums either, already tried that

FREE Hosting List php, mysql and more

This summary is not available. Please click here to view the post.

Getting A 1GB Yahoo China Account

Getting A 1gb Yahoo China Account

1. Sign for a yahoo ID... you can do this in my.yahoo.com. DO NOT check the automatically create an Email address
2. Clear ALL cookies
3. Activate mail account at cn.mail.yahoo.com
(you get 100Mb storage first *don't worry*), then sign-out
NOTE: FYI, the two boxes in the activation page is lastname and firstname

Upgrading to 1Gb Yahoo China Account
1. Sign-in to Yahoo Messenger, add a contact, sign-out
2. Go back to cn.mail.yahoo.com (all pages would be in Chinese)
3. Click the 1G orange label (graphic) *look at the lower right of the page*
4. Type-in your Yahoo ID and Password *look at the bottom of the page*
5. You'll go to two more Chinese pages (Just click the bottom centered label in the page)
6. Tadah!! Your upgraded to 1Gig and your default is English with Free POP3

There's no pesky graphic or flash ads at the moment... but your email add would be username[at]yahoo.com.cn

I think that's good enough for people without Gmail

Go to Windows updates anonymously

Would you like to use the Windows Update feature without being forced to register with Microsoft? OK then, this is what you can do:

Launch good ol' Regedit.
Go down to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion.
Look for a value named RegDone. If it isn't there create a new value with that name.
Right click the new value and choose Modify. Make the value 1.
Close Regedit and
Enjoy!

Downloading Windows Media Streams

Downloading Windows Media Streams

Look for the video source url in the webpage source code and copy it:
user posted image
To view the source code, r-click on the webpage that plays the video and select "view source." If unable to do so, just close the window and in the main Internet Explorer (IE) window, click the History icon or press Ctrl+H. Look for the same webpage on the left pane. On the menu, click View > View source.

Paste the video source url in Windows Media Player. (File > Open URL... )
Let the video play now. When the correct title appears on the playlist pane, r-click on it and select "Properties."
Select the source url and copy it:
user posted image

Paste this url in Flashget to download the video clip.

WAREZ DEFINITION

0-Day - Latest software releases.

0-Sec - Same as above, although the period of time between ripping a game or application and it appearing on a warez site is even shorter.

Ace File - The first file in a series of compressed archives (the one you double click on to decompress all the files at once).

Active List - Similar to a mailing list, but uses ICQ to send instant messages to subscribers.

Alpha - Software receives this label when it is in the very early stages of development. Usually full of bugs, so don't touch it with a barge pole.

Anti-Leech - A system which uses cgi scripts to prevent people stealing links and then taking the credit for uploading the files.

Appz - Short for applications. For example Flash 5 or GoLie 5.5.

ASF File - The worst quality movie file format (still pretty good though), much smaller in size than dat or mpg.

Banner Site - Password and username restricted FTP site. To get the correct login details you must click on several banners.

Beta - Refers to an almost finished piece of software that is released to the public for bug testing.

BSA - An acronym for Business Software Alliance, an organisation who are responsible for enforcing anti-piracy litigation. Similar groups in charge of controlling software "theft" include the SIIA, SPA and ELSPA.

BSOD - Many people read about BSODs on bulletin boards and think that they're being insulted, but there is no need to get paranoid. It is actually an acronym for "Blue Screen Of Death". These can occur for a multitude of reasons (old Bill likes to keep us guessing!) and are the bane of PC user's lives.

Bulletin Board - A virtual meeting place on the web similar to a chat room except that it isn't in real time. One person leaves a message then others come along, read it and add a reply. Each new discussion is called a new topic or thread and has it's own link. Whenever a new topic is created the older topics are pushed one place downwards in the list. When someone replies to an older topic it is brought back to the top of the list.

C?? File - File extension that indicates that a file is part of an .ace or .rar series of compressed files.

Cgi Scripts - These are referrers which are used in url’s. When you click on a link with a ?cgi reference you are directed to a sponsor’s website or an anti-leech protected file.

Cookie - A tiny text file (usually less than 1kb), which is stored on your hard drive when you visit a web site. These are used to remember who you are so that you can access members only areas on the site without having to type in a password every time or to retain your personalised settings so that they are available the next time you visit.

Courier - Someone who is involved in the logistics of delivering new releases directly from the release groups themselves to FTP sites.

Crack - A tiny executable file that is used to transform a shareware program into the full version. Also used to remove any copy protection from the main executable of games (this will already have been done in "ripped" warez games).

CRC Error - These can occur when you try to decompress a file that has become corrupt during the downloading process, usually as a result of too much resuming.

Credits - The amount of data you are permitted to download from a ratio site. The more credits you have the more software you are allowed to download.

DAP - A quick way of referring to "Download Accelerator Plus", a free download manager that claims to speed up file transfers by up to three hundred per cent. It works by making multiple connections to the same file and is paid for by revolving advertising banners.Also supports resume.

DAT File - File format used for movies, identical in quality and size to mpg as far as I can tell.

DC - The lazy way of referring to the Dreamcast, Sega's latest console incarnation.

Decompression - Unpacking many files that have been stored in a single archive.

Distro - A concise means of referring to a distribution FTP site. These are huge storage areas which act as a springboard for the transfer of new releases. Their whereabouts are never public disclosed to aid their survival rate. You can think of them as the initial source from which warez emanates.

Direct Downloads - Links to actual files rather than other warez sites or pages. These are usually gathered together from many different sites and put on one page for your convenience.

DivX - Movies ripped from a DVD using the DivX video codecs. Can be played back using Media Player.

DIZ File - Short for description. Very brief text file found in warez archives stating the title of the software, the number of files that makes up the set and the group who released it.

Download (or DL) - Copying files from a web server or FTP site to your computer using a modem.

Emulator - An application that simulates another computer system or console using your PC.

FAQ - Stands for Frequently Asked Questions.

FAW - Abbreviation for "Files Anywhere", a popular, free web storage service.

File Transfer Protocol (FTP) - The method used to transfer files from one computer to another using a modem.

Filler - Refers to a person who uploads stuff to pub for others to download.

Flaming - A general net term for "verbally" attacking someone. This can be done via email, bulletin board, chat room or any medium which involves communication across the web.

Freedrive - Virtual hard drive storage area on the web. Free to join and anything and everything can be uploaded or downloaded.

Freeware - Unrestricted software that is downloaded from the net and is completely free to use. Often paid for using advertising.

FTP Client / Browser - A program used to access, upload and download data from FTP sites.

FXP - File eXchange Protocol - This refers to server to server transfer. You can transfer files from one pub to another using very little of your own bandwidth. This is by far the best means for distributing large files, only problem is that a very limited number of FXP capable pubs exist.

Gamez - Pretty self-explanatory this one.

Getright - One of the best download managers available.

Gold - A piece of software is said to have gone gold when the final version is complete and it is ready to ship to the public.

Gozilla - Another excellent download manager.

Hacking - Gaining access to a remote computer without the authorisation to do so. Usually for the purposes of stealing confidential information or the malicious destruction of data.

Hammering - Repeatedly trying to access an FTP site using an FTP client or download manager.

HTTP - Stands for "Hypertext Transfer Protocol". The method you use to view a web page. Always comes before the address of a website in your Url bar.

ICQ - Derives from the term "I Seek You" and is used for real time chat and transferring files over the internet.

IP - 32 bit binary number identifying the position of a computer on the Internet - similar to the URL. The URL is usually easier to remember as it is alpha based rather than numerical.

IP Range - usually referred to when talking about scanning a particular range of ip addresses. They can be broken down into A, B, and C ranges - AAA.BBB.CCC.xxx. Usually an entire B range will be scanned at a time.

IRC - Stands for "Instant Relay Chat". Used for real time chat and transferring files over the Internet.

ISO - An exact copy of an original CD, all the multimedia bits and pieces are uncut and therefore they are extremely large and awkward to download.

Java - Html scripts used to add functionality to or bring web pages alive. These include animation (such as the title graphic on my main page), menus, chat rooms, buttons, pop ups and so on.

KBps - Kilobytes per second - This is what most transfer speed are referring to. One Byte is comprised of 8 Bits.

Kbps - Kilobits per second - This is what most modem speeds are referring to. Why? Probably to make them look faster. Divide by 8 to get KBps.

Key Generator - A tiny executable program that is capable of creating a serial number from a specified username. These are specific to particular applications or utilities, so a serial number created with one key generator will only work for the program for which the key generator was developed.

Lamer - An annoying and overused general derogatory term used to insult/put down anyone and everything.

Leeching - Downloading files without giving anything back in return or copying other people’s links.

Mirror - An exact copy of a web site that is stored on a different server. Using multiple locations for warez sites allows the site to be accessed using a different address if the main site is deleted.

Modchip - Very common website sponsor found on warez sites. They don’t mind their banners being used on illegal software sites because their products are one of the “grey areas” of the law. Modchips are small pieces of electronic circuitry which allow copied games to be played on your Playstation. If a Playstation has been fitted with a Modchip it is said to have been "chipped".

MP3 File - Compressed music file format. Average track size is between 3 and 4 meg compared to 40-ish meg in wav format.

MPG File - The best quality and largest movie file format.

Multi Web Space Faker - A tool used to create lots of free web space accounts simultaneously.

Name Zero - An organisation that offers free website domain names. The main drawbacks are that you have to put up with a very bulky banner residing at the bottom of your page and the fact that you never actually own your chosen address.

NFO File - Short for info or information. Basic text file containing all the important details relating to a particular release, such as number of files, release date, copy protection system, installation instructions etc.

Nuked - A release is said to be nuked if it is completely unplayable. Usually when this happens another group re-releases the particular game, although fixes do sometimes follow on to rescue the game from trash can.

OEM - An acronym for Original Equipment Manufacturer. OEM software products are repackaged versions of the full retail product. They are often re-branded to suit the needs of the particular vender and are much more reasonable priced because they lack excessive packaging and a hard copy of the manual.

OST - Not strictly a warez term this one, but one that you are likely to come across while searching for MP3 music. It stands for original soundtrack (movie music).

Patch - We all know games and applications aren't perfect. When they are released we would hope that they have been thoroughly tested for bugs and incompatibility problems, but you can guarantee that many of these will still slip through the quality control net. Once the program is released to the general public, the bug reports start to flood in. A patch is a downloadable executive file which takes these reports into account and attempts to incorporate all the fixes for these known problems. A patch can resolve incompatibility problems, prevent crashes or improve the performance of a piece of software.

Piracy - The replication and distribution of videos or computer software.

Pop-ups - Irritating browser windows that open automatically when you visit a warez site. Usually contain voting portals or porn sites.

Port - A port is a term used when referring to FTP sites and is an essential extension of the address used to access them. If the port number of an FTP site isn't specified the default setting of 21 will automatically be used.

Pron - A long time ago in a galaxy far, far away someone posted a request for porn on a bulletin board, only, because of a typing error what he ended up asking for was "pron". Since then this has become a bit of a running joke and so it is now deliberately misspelt.

Proxy - A third party server which acts as an anonymous go between whenever you request a web page or contact a remote server. The message from your computer is first sent through the proxy server before being relayed to the final destination so that it appears as though the request has come from the IP address of the proxy server rather than you. Used when you wish to maintain your privacy on the net or speed up your connection (much more detailed info on this subject in the "more tips" section).

Psx - A quick way of referring to the Sony Playstation.

Pub - A free for all FTP site where anonymous access is permitted. They are usually used for transferring large files to many people because of their high speeds.

Pub Scanner - Someone who scours the net for anonymous access FTP sites which permit the creation and deletion of files. These are then exploited by uploading software for others to share.

Pub Stealer - Someone who posts the IP address of a public FTP site which they themselves have not built. Some pub stealers justify this by claiming that the elitism of private FXP groups discriminates against those people who do not have access, yet others simply post other people's work to try to claim the credit for themselves. Either way though, pub stealers are despised by the FXP groups and praised by those who would otherwise not have access to them.

Rar File - The first file in a series of compressed archives (the one you double click on to decompress all the files at once). Usually decompressed using a program called Winrar.

Release Groups - A group of people who are involved in cracking and / or ripping software and then repackaging it into easily downloadable segments.

Ratio - Two numbers separated by a semi-colon. Indicates how much data you must upload to an FTP site before you are permitted to download anything.

Reg File - Tiny file that adds essential configuration details into the registry.

Resume - The ability to stop and start downloading / uploading a file whenever you choose without having to start from the beginning again.

Rip - Software that has had all the non-essential gubbins removed to reduce its size. Videos and music are always the first casualties.

Raped - A release is branded with this term if it has been damaged beyond repair during the ripping process.

RM File - Shorthand for Real Media, a file format used to encode video sequences, which can only be played back using the "Real Player". Video clips produced using this format are not of the highest quality, but do have the advantage of a small file size.

ROM - Games which are designed for other platforms, but are played on the PC using an emulator.

Serial - A valid username and password that is saved as a basic text file and is used to register a shareware program and therefore remove all the restrictions.

Shareware - Try before you buy software downloaded from the net.

Spam - Unsolicited junk e-mail. Supposedly stands for "Stupid Person's Annoying Message".

Sponsor - To make some money webmasters can place adverts on their sites. Each time you click on these adverts or banners they get paid a few cents for bringing potential customers to the sponsors website.

Surfer Friendly (SF) - Surfer friendly sites supposedly have no blind links, pop-ups or porn banners. Don't be fooled by this label though as some sites will tell you fibs to get you to visit them.

Sys Op - The person who has the responsibility for running the computer from which an FTP site has been established. When warez is uploaded to public FTP sites and then suddenly goes "Missing In Action" you can often lay the blame at the door of the Sys Op who has an obligation to make sure his/her server stays within the boundaries of the law (i.e. warez free).

Tag / Tagged - This generally refers to the tagging of a pub. A FXP group uses a directory structure to claim it as their own. A general rule is that if a tag is 2 weeks old and not in use it has been abandoned.

Top List - Chart which lists in rank order the best warez sites. Worked out on the basis of votes.

Trading - Swapping warez, file for file via FTP, ICQ etc. Not usually approved of by the real warez community who believe that warez should be freely distributed. To put it simply, it is not the "warez way".

Trainer - A small, executable program which sits in your taskbar while you play a game. Hotkeys are associated with cheat commands so that when they are pressed you are given extra ammo, weapons, lives or the ability to toggle between invincible/mortal modes etc etc.

Trojans - Nasty virus like attachments which can be merged with executable files. These are tiny so are unlikely to arouse suspicion. When run they allow a hacker to access your computer and wreak havoc. Can occasionally be found in warez files.

UBB - Shorthand for Ultimate Bulletin Board, currently the most popular script used for creating warez bulletin boards.

UBB Hacks - This term falsely gives the impression that something destructive or malicious is involved, but when you hear people talking about a hack in the context of bulletin boards they are simply referring to code which helps to improve the functionality of a board. For example a "thread hack" would effect the way in which individual threads look and operate.

Undeletable Pub - An anonymous access, public FTP site where the permission attributes are set to allow uploads and downloads, but do not permit deletion.

Unzip - Unpacking or decompressing many files that have been stored in a single archive. Technically only used when talking about zip files.

Upload - Copying files from your computer to a web server or FTP site using a modem.

URL - Stands for "Uniform Resource Locator". The web site address you type into your browser.

VCD - Stands for Video Compact Disc. Basically these are huge movie files which can be viewed with the latest version of Media Player.

Voting - Members of the warez scene are very keen to reach the number one slot of top lists such as Voodoo, Top 60 etc. and will therefore encourage you to vote for their site to improve their position and get the credit they deserve (or not as the case may be!).

Warez - "Pirated" Full version software that is uploaded to the internet and is available for free download.

Warez Board - Bulletin board used by the warez community to share links and discuss anything related to warez.

Winace - Another utility used for decompressing all the common archive formats. Not great in my opinion. See below for a better one.

Wingate - Similar to a proxy in that they are used to hide your identity, except all information actually passes through the Wingate, if you have a slow Wingate you get slow download/upload speeds. Wingates are also used to force FXP transfer on pubs that do not normally accept FXP, again all data passes through the Wingate so you need one that is fast for it to be useful.

Winrar - Utility used for decompressing .rar files and much more.

Winzip - An essential tool used to decompress warez files.

Zip - A common compression format used to store warez.

Online classes made easy

Hello everyone! PP here with my first post...

This won't be for everyone, but there are a few who would kill for it

And sorry for the drawn-out story, but you'll learn about the site from it!

If you ever take an online course, theres a good chance it will be through the following website:


http://www.thinkwell.com


Stinkwell (lol, I am trying not to use there name too much) produces a variety of textbooks delivered on CD-ROM and the Internet. They're huge in the online course industry. Students that take course using Stinkwell, use their website to do homework, chat with the class, take tests, yadda, yadda, yadda.

It really PMO (pissed me off) that I had to spend hours doing the homework that didn't really affect the final grade. They make thier homework very cheat proof I noticed. So, I started sniffing around to see, if maybe, someone had the answers posted on the internet. No luck though. cray.gif

I went on to complete my class, Advanced Biophysics BTW, with a not so perfect grade. As I was trying to steal some flash files from the website before my registration code expired, I made a nifty little discovery. They left their 'backdoor' open on another server where they host ALL of their publications.

Videos, printed textbooks, homework & TEST ANSWERS, all of the cool flash files I was looking for, Instructor manuals and more were all just sitting there. If only I would of known this a month before!

I'm sharing this in hopes that another generation can use it to their advantage. AND you better hurry. Stinkwell will for sure 'close the door' once they see all the traffic going in and out :)

Here is what I mean. Take the next URL where the the flash file points to. Shorten it up a little, and you can view the folder where all flash files are stored. Go up another level, and you'll be browsing the main folder.
Here's a neat Flash animation of the working of the human heart:


http://207.207.4.198/pub/flash/31/31.html


Use some common sense with this... surf anonymously and don't pass it on too far

HAVE FUN AND THANK P~PENGUIN AFTER YOUR NEXT CLASS!

For all those not going to be enrolled, go ahead and brush up on your Chemistry, Government, and Public Speaking skills. It won't hurt you to take a break from the certification manuals :)

And if they shut her down, I've got the important stuff backed-up.

Using Google for searching ebooks

Google has some fantastic potential for you to find whatever you are after on the internet.

To search for a book / program / file perhaps try the following.

Go to Google's search page and use the following criteria in the search dialog

intitle:index.of? file extension Name of item

e.g. intitle:index.of? chm syngress

This will hopefully give you a listing of all websites that google has cached that contain references to files in CHM format that are published by SYNGRESS.

---------------
I use in Google

+("index of") +("/ebooks"|"/book") +(chm|pdf|zip|rar) +syngress

or

allinurl: +(rar|chm|zip|pdf|tgz) Syngress
Enjoy

Viewing Leftover Driver Entries

Windows keeps a Device Manager entry for every piece of
hardware that's ever been recognized by the system, regardless
of whether it is currently present in the machine or was even
set up correctly in the first place. The "View Hidden Devices"
option in Device Manager won't show you these "residual"
drivers. You can force it to show you everything by going to
My Computer Properties, the Advanced tab, Environment
Variables, and adding a new system variable with the name
"DEVMGR_SHOW_NONPRESENT_DEVICES" and a value of 1. Now opening
Device Manager and choosing "Show Hidden Devices" really will
show you everything. Standard practice at the factory is to
use a single image and just move it from model to model,
letting it plug and play all the new hardware along the way.
This leaves you with an impressive list of hardware still in
the Device Manager, but no longer in the system. You also see
this to a lesser degree when you restore a system from an
image you created for backup purposes. These "residual"
drivers can sometimes cause all kinds of weirdness and are
best removed by right-clicking on their entry in the Device
Manager and choosing "uninstall".

This works on Windows 2000/XP (and I assume Server 2003,
though I haven't tried it). Anyone running a factory loaded
Compaq or Dell will be amazed at the amount of junk left over
from this process.
Jon Pickle

Thanks, Jon. Indeed, Windows has a thing about hanging on to ghost
entries in Device Manager and also in the Registry. (This is one of the
reasons why Registries inflate so much over time.) A little judicious
ghostbusting lets your PC run cleaner and leaner!

What Should I Do With Image Files?

1. What's a image file?
(>) A image file is a CD/DVD, but instead of insert it into your CD/DVD-Rom, you open it from inside your Hard Disk. So, it's a file that replaces a normal CD/DVD. Inside the image are the CD/DVD files like if it were a CD/DVD.

2. What are the image files extensions?
(>) There's many extensions, but the most common are:
(>) iSO (Generic image file)
(>) BiN/CUE (Generic BiN image file)
(>) NRG (An image created using Nero Burning ROM)
(>) iMG/CCD/SUB (An image created using CloneCD)
(>) MDF (An image created using MagicISO Maker)

There are many other images, but these are the most common.

3. How to open a image file?
(>) The most common way to open image files, is to use a virtual CD/DVD-Rom. It's like a normal CD/DVD-Rom, only that you mount the images directly from your computer, installing a simple program.

4. What program should i use to create images files?
(>) Usually a CD/DVD Burning software has that option, but personally i use UltraISO. It allow me to create an ISO, BiN/CUE, NRG and iMG/CCD/SUB image file.

5. What program should i use to mount the images?
(>) Daemon-Tools is the most powerful one to use, and the most simple too.

6. How to burn a image file?
(>) Some image files must be burned using a certain software in order to work fine, but usually a common CD/DVD burning software works fine. I use Nero Burning ROM to burn my images.

7. How to work with Daemon-Tools?
(>) 1. Install the software into your Hard Drive. After installing reboot (or not) your PC.
(>) 2. After 1. , open Daemon-Tools. It will appear in your startup bar.
(>) 3. Right click on it, go to Virtual CD/DVD-ROM » Set number of devices » 2 Drives. If you want to use more drives you can set it on. I personally use 2. It's your decision.
(>) 4. Right click on it, go to Virtual CD/DVD-ROM » Device x: [X:](....). Here you will mount your image. Just choose the image to open it (x means Device 1 or 2, etc.)([X:] the letter of your device).
(>) 5. Done, now your image is working like a CD.

8. How to burn with Nero Burning ROM?
(>) 1. Install Nero Burning ROM.
(>) 2. Open it, choose what is the storage type you gonna use to burn the image, or is a CD or a DVD.
(>) 3. Go to Copy and Backup » Burn Image to Disc.
(>) 4. Choose the image you want to burn.
(>) 5. Done, let it burn baby!

FiNAL NOTES:
(>) If you want to burn a BiN with Nero Burning ROM, you will have to have the CUE file. When you are going to open the image, if it's BiN, you open the CUE file. If you don't have the CUE and you don't want to download it, it's simple:
1. Open Daemon-Tools.
2. Mount your BiN file.
3. Open Nero Burning ROM.
4. Open it, choose what is the storage type you gonna use to burn the image, or is a CD or a DVD.
5. Go to Data » Make Data CD.
6. Now open the image you mounted through your virtual drive. Select all files, and drag the files into Nero Burning ROM window that is opened.
7. Done, let it burn.

Trojan Ports

TCP 1 Breach.2001, SocketsDeTroie.230, SocketsDeTroie.250
TCP 28 Amanda.200
TCP 31 MastersParadise.920
TCP 68 Subseven.100
TCP 142 NetTaxi.180
TCP 146 Infector.141, Intruder.100, Intruder.100
TCP 171 ATrojan.200
TCP 285 WCTrojan.100
TCP 286 WCTrojan.100
TCP 334 Backage.310
TCP 370 NeuroticKat.120, NeuroticKat.130
TCP 413 Coma.109
TCP 420 Breach.450
TCP 555 Id2001.100, PhaseZero.100, StealthSpy.100
TCP 623 Rtb666.160
TCP 660 Zaratustra.100
TCP 661 Noknok.800, Noknok.820
TCP 666 BackConstruction.210, BackConstruction.250, Bla.100, Bla.200, Bla.400, Bla.503, Cain.150, Dimbus.100, Noknok.820, Ripper.100, SatansBackdoor.100, SatansBackdoor.101, SatansBackdoor.102, Unicorn.100, Unicorn.101, Unicorn.110
TCP 667 SniperNet.210, Snipernet.220
TCP 668 Unicorn.101, Unicorn.110
TCP 680 Rtb666.160
TCP 777 Tiny.100, Undetected.230, Undetected.300, Undetected.310, Undetected.320, Undetected.330, Undetected.331, Undetected.332
TCP 785 NetworkTerrorist.100
TCP 800 NeuroticKitten.010
TCP 831 NeuroticKat.100, NeuroticKat.120, NeuroticKat.130
TCP 901 NetDevil.130, NetDevil.140
TCP 1000 DerSpaeher.200
TCP 1001 Silencer.100
TCP 1008 AutoSpy.100
TCP 1010 DerSpaeher.200
TCP 1015 Doly.150
TCP 1111 TPort.100
TCP 1130 Noknok.800, Noknok.820
TCP 1207 SoftWAR.100
TCP 1243 Subseven.100, SubSeven.110, SubSeven.180, SubSeven.190, Subseven.200
TCP 1245 VoodooDoll.006
TCP 1269 Matrix.130
TCP 1480 RemoteHack.130
TCP 1568 RemoteHack.100, RemoteHack.110
TCP 1600 DirectConnection.100
TCP 1601 DirectConnection.100
TCP 1602 DirectConnection.100
TCP 1634 NetCrack.100
TCP 1784 Snid.120, Snid.212
TCP 1999 TransmissionScout.100, TransmissionScout.110
TCP 2000 ATrojan.200, InsaneNetwork.400
TCP 2001 DIRT.220, TrojanCow.100
TCP 2003 TransmissionScout.100, TransmissionScout.110
TCP 2023 RipperPro.100
TCP 2040 InfernoUploader.100
TCP 2115 Bugs.100
TCP 2140 DeepThroat.100, DeepThroat.200, DeepThroat.310
TCP 2332 SilentSpy.202
TCP 2589 Dagger.140
TCP 2600 DigitalRootbeer.100
TCP 2989 Rat.200
TCP 3128 MastersParadise.970
TCP 3129 MastersParadise.920, MastersParadise.970
TCP 3150 DeepThroat.100, DeepThroat.200, DeepThroat.310, MiniBacklash.110
TCP 3215 BlackStar.100, Ghost.230
TCP 3333 Daodan.123
TCP 3410 OptixPro.100, OptixPro.110
TCP 3456 Force.155, TerrorTrojan.100
TCP 3505 AutoSpy.130, AutoSpy.140
TCP 3586 Snid.120, Snid.212
TCP 3700 PortalOfDoom.100
TCP 3723 Mantis.100
TCP 3800 Eclypse.100
TCP 3996 RemoteAnything.364
TCP 4000 SkyDance.220, SkyDance.229
TCP 4201 Wartrojan.160, Wartrojan.200
TCP 4225 SilentSpy.202
TCP 4321 Bobo.100
TCP 4444 AlexTrojan.200, Crackdown.100
TCP 4488 EventHorizon.100
TCP 4523 Celine.100
TCP 4545 InternalRevise.100, RemoteRevise.150
TCP 4567 FileNail.100
TCP 4666 Mneah.100
TCP 4950 ICQTrojan.100
TCP 5005 Aladino.060
TCP 5025 Keylogger.WMRemote.100
TCP 5031 NetMetro.104
TCP 5032 NetMetro.104
TCP 5033 NetMetro.104
TCP 5050 RoxRat.100
TCP 5151 OptixLite.020, OptixLite.030, OptixLite.040
TCP 5190 MBomber.100
TCP 5277 WinShell.400
TCP 5343 WCRat.100
TCP 5400 BackConstruction.120, BackConstruction.150, BladeRunner.080, DeepThroat.300
TCP 5401 BackConstruction.120, BackConstruction.150, BackConstruction.210, BackConstruction.250, BladeRunner.080, DeepThroat.300, Mneah.100
TCP 5402 BackConstruction.210, BackConstruction.250, BladeRunner.080, DeepThroat.300, Mneah.100
TCP 5534 TheFlu.100
TCP 5550 XTCP.200, XTCP.201
TCP 5555 Noxcape.100, Noxcape.200
TCP 5695 Assassin.100
TCP 5714 WinCrash.100
TCP 5741 WinCrash.100
TCP 5742 WinCrash.103
TCP 5802 Y3KRat.160
TCP 5810 Y3KRat.160
TCP 5838 Y3KRat.170
TCP 5858 Y3KRat.110, Y3KRat.120, Y3KRat.140
TCP 5880 Y3KRat.140
TCP 5881 Y3KRat.110, Y3KRat.120, Y3KRat.140
TCP 5882 Y3KRat.100, Y3KRat.110, Y3KRat.120, Y3KRat.140, Y3KRat.150
TCP 5883 Y3KRat.110, Y3KRat.140
TCP 5884 Y3KRat.140, Y3KRat.150
TCP 5885 Y3KRat.110, Y3KRat.120, Y3KRat.140
TCP 5886 Y3KRat.120, Y3KRat.140
TCP 5887 Y3KRat.110, Y3KRat.120, Y3KRat.140
TCP 5888 Y3KRat.100, Y3KRat.110, Y3KRat.120, Y3KRat.140, Y3KRat.150
TCP 5889 Y3KRat.100, Y3KRat.110, Y3KRat.120, Y3KRat.140, Y3KRat.150
TCP 5890 Y3KRat.140
TCP 6400 Thething.100, Thething.150
TCP 6556 AutoSpy.120, AutoSpy.122
TCP 6655 Aqua.020
TCP 6660 LameSpy.095
TCP 6666 LameRemote.100, ProjectMayhem.100
TCP 6669 Vampire.100
TCP 6670 DeepThroat.200, DeepThroat.210
TCP 6671 DeepThroat.310
TCP 6699 HostControl.101
TCP 6711 DeepThroat.300, Noknok.820, SubSeven.180, SubSeven.190
TCP 6712 Subseven.100
TCP 6713 Subseven.100
TCP 6767 NTRC.120
TCP 6776 SubSeven.180, SubSeven.190, Subseven.200
TCP 6789 Doly.200
TCP 6796 SubSeven.214
TCP 6912 ShitHeep.100
TCP 6939 Indoctrination.100
TCP 6953 Lithium.100
TCP 6969 2000Cracks.100, Bigorna.100, Danton.110, Danton.210, Danton.220, Danton.310, Danton.320, Danton.330, GateCrasher.110, NetController.108, Sparta.110, VagrNocker.120
TCP 6970 Danton.330
TCP 7001 Freak88.100
TCP 7119 Massaker.100
TCP 7200 Massaker.110
TCP 7300 Coced.221
TCP 7301 Coced.221
TCP 7306 NetSpy.200, NetSpy.200
TCP 7410 Phoenix.190, Phoenix.200
TCP 7511 Genue.100
TCP 7609 Snid.120, Snid.212
TCP 7614 Wollf.130
TCP 7648 BlackStar.100, Ghost.230
TCP 7788 Last.2000, Matrix.200
TCP 7826 MiniOblivion.010, Oblivion.010
TCP 7887 SmallFun.110
TCP 7891 Revenger.100
TCP 7979 VagrNocker.200
TCP 7997 VagrNocker.200
TCP 8000 XConsole.100
TCP 8011 Way.240
TCP 8012 Ptakks.215, Ptakks.217
TCP 8110 LoseLove.100
TCP 8111 LoseLove.100
TCP 8301 LoseLove.100
TCP 8302 LoseLove.100
TCP 8372 NetBoy.100
TCP 8720 Connection.130
TCP 8734 AutoSpy.110
TCP 8811 Force.155
TCP 8899 Last.2000
TCP 9000 Aristotles.100
TCP 9301 LoseLove.100
TCP 9400 InCommand.100, InCommand.110, InCommand.120, InCommand.130, InCommand.140, InCommand.150, InCommand.153, InCommand.160, InCommand.167, InCommand.170
TCP 9401 InCommand.100, InCommand.110, InCommand.170
TCP 9402 InCommand.100, InCommand.110
TCP 9561 CRatPro.110
TCP 9563 CRatPro.110
TCP 9580 TheefLE.100
TCP 9696 Danton.210, Ghost.230
TCP 9697 Danton.320, Danton.330, Ghost.230
TCP 9870 R3C.100
TCP 9872 PortalOfDoom.100
TCP 9873 PortalOfDoom.100
TCP 9874 PortalOfDoom.100
TCP 9875 PortalOfDoom.100
TCP 9876 Rux.100, SheepGoat.100
TCP 9877 SmallBigBrother.020
TCP 9878 SmallBigBrother.020, TransmissionScout.100, TransmissionScout.110, TransmissionScout.120
TCP 9879 SmallBigBrother.020
TCP 9999 ForcedEntry.100, Infra.100, Prayer.120, Prayer.130, TakeOver.200, TakeOver.300
TCP 10001 DTr.130, DTr.140
TCP 10013 Amanda.200
TCP 10067 PortalOfDoom.100
TCP 10100 Gift.240
TCP 10101 NewSilencer.100
TCP 10167 PortalOfDoom.100
TCP 10528 HostControl.100, HostControl.260
TCP 10607 Coma.109
TCP 10666 Ambush.100
TCP 11011 Amanda.200
TCP 11050 HostControl.101
TCP 11051 HostControl.100, HostControl.260
TCP 11223 AntiNuke.100, Progenic.100, Progenic.110
TCP 11225 Cyn.100, Cyn.103, Cyn.120
TCP 11306 Noknok.800, Noknok.820
TCP 11831 Katux.200, Latinus.140, Latinus.150, Pest.100, Pest.400
TCP 11991 PitfallSurprise.100
TCP 12043 Frenzy.2000
TCP 12345 Fade.100, Netbus.160, Netbus.170, VagrNocker.400
TCP 12346 Netbus.160, Netbus.170
TCP 12348 Bionet.210, Bionet.261, Bionet.280, Bionet.302, Bionet.305, Bionet.311, Bionet.313, Bionet.316, Bionet.317
TCP 12349 Bionet.084, Bionet.261, Bionet.280, Bionet.302, Bionet.305, Bionet.311, Bionet.313, Bionet.314, Bionet.316, Bionet.317, Bionet.401, Bionet.402
TCP 12389 KheSanh.210
TCP 12478 Bionet.210
TCP 12623 Buttman.090, Buttman.100
TCP 12624 Buttman.090, Buttman.100
TCP 12625 Buttman.100
TCP 12904 Akropolis.100, Rocks.100
TCP 13473 Chupacabra.100
TCP 13753 AFTP.010
TCP 14100 Eurosol.100
TCP 14194 CyberSpy.840
TCP 14286 HellDriver.100
TCP 14500 PCInvader.050, PCInvader.060, PCInvader.070
TCP 14501 PCInvader.060, PCInvader.070
TCP 14502 PCInvader.050, PCInvader.060, PCInvader.070
TCP 14503 PCInvader.050, PCInvader.060, PCInvader.070
TCP 14504 PCInvader.050, PCInvader.060
TCP 15092 HostControl.100, HostControl.260
TCP 15382 SubZero.100
TCP 15432 Cyn.210
TCP 15555 ICMIBC.100
TCP 16322 LastDoor.100
TCP 16484 MoSucker.110
TCP 16661 Dfch.010
TCP 16969 Progenic.100
TCP 16982 AcidShiver.100
TCP 17300 Kuang.200
TCP 17499 CrazzyNet.370, CrazzyNet.375, CrazzyNet.521
TCP 17500 CrazzyNet.370, CrazzyNet.375, CrazzyNet.521
TCP 17569 Infector.141, Infector.160, Infector.170, Infector.180, Infector.190, Infector.200, Intruder.100, Intruder.100
TCP 17593 AudioDoor.120
TCP 19191 BlueFire.035, BlueFire.041
TCP 19604 Metal.270
TCP 19605 Metal.270
TCP 19991 Dfch.010
TCP 20000 Millenium.100
TCP 20001 Millenium.100, PshychoFiles.180
TCP 20002 AcidKor.100, PshychoFiles.180
TCP 20005 MoSucker.200, MoSucker.210, MoSucker.220
TCP 21212 Schwindler.182
TCP 21554 Exploiter.100, Exploiter.110, Girlfriend.130, GirlFriend.135
TCP 21579 Breach.2001
TCP 21584 Breach.2001
TCP 21684 Intruse.134
TCP 22068 AcidShiver.110
TCP 22115 Cyn.120
TCP 22222 Prosiak.047, Ruler.141, Rux.300, Rux.400, Rux.500, Rux.600
TCP 22223 Rux.400, Rux.500, Rux.600
TCP 22456 Bla.200, Bla.503
TCP 22457 AcidShiver.120, Bla.200, Bla.503
TCP 22784 Intruzzo.110
TCP 22845 Breach.450
TCP 22847 Breach.450
TCP 23005 Infinaeon.110, NetTrash.100, Oxon.110, WinRat.100
TCP 23006 Infinaeon.110, NetTrash.100, Oxon.110, WinRat.100
TCP 23032 Amanda.200
TCP 23432 Asylum.010, Asylum.012, Asylum.013, Asylum.014, MiniAsylum.110
TCP 23456 EvilFTP.100, VagrNocker.400
TCP 23476 DonaldDick.153, DonaldDick.154, DonaldDick.155
TCP 23477 DonaldDick.153
TCP 24000 Infector.170
TCP 24307 Wildek.020
TCP 25386 MoonPie.220
TCP 25486 MoonPie.220
TCP 25555 FreddyK.100, FreddyK.200
TCP 25556 FreddyK.100
TCP 25685 MoonPie.010, MoonPie.012, MoonPie.130, MoonPie.220, MoonPie.240, MoonPie.400
TCP 25686 MoonPie.135, MoonPie.200, MoonPie.400
TCP 25982 MoonPie.135, MoonPie.200
TCP 26274 Delta.050
TCP 27160 MoonPie.135, MoonPie.200
TCP 27184 Alvgus.100, Alvgus.800
TCP 27374 Muerte.110, Subseven.210, SubSeven.213
TCP 28429 Hack'a'Tack.2000
TCP 28430 Hack'a'Tack.2000
TCP 28431 Hack'a'Tack.2000
TCP 28432 Hack'a'Tack.2000
TCP 28433 Hack'a'Tack.2000
TCP 28434 Hack'a'Tack.2000
TCP 28435 Hack'a'Tack.2000
TCP 28436 Hack'a'Tack.2000
TCP 29559 DuckToy.100, DuckToy.101, Katux.200, Latinus.140, Latinus.150, Pest.100, Pest.400
TCP 29891 Unexplained.100
TCP 30000 Infector.170
TCP 30001 Error32.100
TCP 30003 LamersDeath.100
TCP 30029 AOLTrojan.110
TCP 30100 NetSphere.127, NetSphere.130, NetSphere.131
TCP 30101 NetSphere.127, NetSphere.130, NetSphere.131
TCP 30102 NetSphere.127, NetSphere.130, NetSphere.131
TCP 30103 NetSphere.131
TCP 30947 Intruse.134
TCP 31320 LittleWitch.400, LittleWitch.420
TCP 31337 BackOrifice.120, Khaled.100, OPC.200
TCP 31415 Lithium.101
TCP 31416 Lithium.100, Lithium.101
TCP 31557 Xanadu.110
TCP 31631 CleptoManicos.100
TCP 31745 Buschtrommel.100, Buschtrommel.122
TCP 31785 Hack'a'Tack.100, Hack'a'Tack.112
TCP 31787 Hack'a'Tack.100, Hack'a'Tack.112
TCP 31789 Hack'a'Tack.100, Hack'a'Tack.112
TCP 31791 Hack'a'Tack.100, Hack'a'Tack.112
TCP 31887 BDDT.100
TCP 31889 BDDT.100
TCP 32100 ProjectNext.053
TCP 32418 AcidBattery.100
TCP 32791 Akropolis.100, Rocks.100
TCP 33291 RemoteHak.001
TCP 33333 Blackharaz.100, Prosiak.047, SubSeven.214
TCP 33577 SonOfPsychward.020
TCP 34324 TelnetServer.100
TCP 34763 Infector.180, Infector.190, Infector.200
TCP 35000 Infector.190, Infector.200
TCP 35600 Subsari.140
TCP 36794 BugBear.100
TCP 37237 Mantis.020
TCP 37651 YAT.210
TCP 37653 YAT.310
TCP 40308 Subsari.140
TCP 40412 TheSpy.100
TCP 40421 MastersParadise.970
TCP 40422 MastersParadise.970
TCP 40999 DiemsMutter.110, DiemsMutter.140
TCP 41626 Shah.100
TCP 44444 Prosiak.070
TCP 45673 Akropolis.100, Rocks.100
TCP 47262 Delta.050
TCP 48006 Fragglerock.200
TCP 49683 HolzPferd.210
TCP 50000 Infector.180
TCP 50130 Enterprise.100
TCP 50766 Fore.100
TCP 51234 Cyn.210
TCP 51966 Cafeini.080, Cafeini.110
TCP 54321 PCInvader.010
TCP 57341 NetRaider.100
TCP 57922 Bionet.084
TCP 58008 Tron.100
TCP 58009 Tron.100
TCP 59090 AcidReign.200
TCP 59211 DuckToy.100, DuckToy.101
TCP 59345 NewFuture.100
TCP 60000 DeepThroat.300, MiniBacklash.100, MiniBacklash.101, MiniBacklash.101
TCP 60411 Connection.100, Connection.130
TCP 60412 Connection.130
TCP 60552 RoxRat.100
TCP 63536 InsaneNetwork.500
TCP 63878 AphexFTP.100
TCP 63879 AphexFTP.100
TCP 64969 Lithium.100
TCP 65000 Socket.100
UDP 1 SocketsDeTroie.250
UDP 666 Bla.200, Bla.400, Bla.503, Noknok.820
UDP 1130 Noknok.800, Noknok.820
UDP 2140 DeepThroat.100, DeepThroat.200, DeepThroat.310
UDP 2989 Rat.200
UDP 3128 MastersParadise.970
UDP 3129 MastersParadise.920, MastersParadise.970
UDP 3150 DeepThroat.100, DeepThroat.200, DeepThroat.310, MiniBacklash.110
UDP 3333 Daodan.123
UDP 3800 Eclypse.100
UDP 3996 RemoteAnything.364
UDP 4000 RemoteAnything.364
UDP 5555 Daodan.123
UDP 5881 Y3KRat.110, Y3KRat.140
UDP 5882 Y3KRat.100, Y3KRat.110, Y3KRat.120, Y3KRat.140, Y3KRat.150
UDP 5883 Y3KRat.110, Y3KRat.140
UDP 5884 Y3KRat.140, Y3KRat.150
UDP 5885 Y3KRat.110, Y3KRat.120, Y3KRat.140
UDP 5886 Y3KRat.120, Y3KRat.140
UDP 5887 Y3KRat.110, Y3KRat.120, Y3KRat.140
UDP 5888 Y3KRat.100, Y3KRat.110, Y3KRat.120, Y3KRat.150
UDP 6953 Lithium.100
UDP 8012 Ptakks.217
UDP 10067 PortalOfDoom.100
UDP 10167 PortalOfDoom.100
UDP 10666 Ambush.100
UDP 11225 Cyn.100, Cyn.103, Cyn.120
UDP 11306 Noknok.800, Noknok.820
UDP 12389 KheSanh.210
UDP 12623 Buttman.090, Buttman.100
UDP 12625 Buttman.100
UDP 14100 Eurosol.100
UDP 23476 DonaldDick.155
UDP 26274 Delta.050
UDP 27184 Alvgus.100
UDP 28431 Hack'a'Tack.2000
UDP 28432 Hack'a'Tack.2000
UDP 28433 Hack'a'Tack.2000
UDP 28434 Hack'a'Tack.2000
UDP 28435 Hack'a'Tack.2000
UDP 28436 Hack'a'Tack.2000
UDP 29891 Unexplained.100
UDP 30103 NetSphere.131
UDP 31320 LittleWitch.400, LittleWitch.420
UDP 31337 BackOrifice.120, OPC.200
UDP 31416 Lithium.100, Lithium.101
UDP 31789 Hack'a'Tack.100, Hack'a'Tack.112
UDP 31791 Hack'a'Tack.100, Hack'a'Tack.112
UDP 33333 Blackharaz.100
UDP 47262 Delta.050
UDP 49683 HolzPferd.210
UDP 60000 MiniBacklash.100

Translating Binary to Text

Contents
1. Introduction
2. The Binary System
3. Converting Binary to ASCII (Text)

Introduction:
We’ve all seen binary code. We’ve come to think of them as a bunch of ones and zeroes in long strings…
010010101010101001101011

But these ones and zeroes can also represent decimal numbers. First off, I will show you how to read these numbers as the decimal numbers we’re used to in our daily life. Then, I will show you how to use those numbers and your keypad to translate them into text. Note that your computer doesn’t use the decimal system, so technically, when it converts binary to text, it doesn’t go through the process I will show you. This is just a divertive way of explaining you how the binary system works.

The Binary System:
Here’s a simple example of binary:
10101

Let’s think of the example above as empty slots:
_ _ _ _ _

First off, you read binary from right-to-left. It’s just the way it’s designed. The first slot from the right represents a value of one, the second from the right a value of two, the third from the right a value of four, the fourth from the right a value of eight, the fifth from the right a value of sixteen, and the cycle continues by multiples of 2. This will never change.

By putting a 1 or a 0 in those slots you are either saying you want to corresponding value that’s attached to that slot or you don’t. A 1 means yes, and a 0 means no. For example, putting a zero in the first slot from the right, but a 1 in the second slot from the right means you want a two, but not a one:
_ _ _ 1 0

As such, the number above equals to a decimal value of two.

As an example, let’s say you want to represent eight in binary form. Well, thinking about the slots, you want the first slot to be 0 because you don’t want a one, you want the second slot to also be 0 because you don’t want a two, you want the third slot to also to be 0 because you don’t want a four, but you want the fifth slot to be 1 because you want a value of eight. As such, eight in binary form is:
1 0 0 0 (or simply 1000 without those underlines)

Now it is important to note that the amount of zeroes that precede the first value of one from the left is unimportant. So for example:
1 0 0 0 is the same as 0 0 0 1 0 0 0 (1000 = 000100)

To get it cleared up, here’s another example:
0 1 is the same as 1


Exercises: What do the following equal in decimal terms?
a) 100
b] 000100
c) 100000
d) 0010

Answers:
a) 4
b] 4
c) 32
d) 2

If you got the answers above right, then you pretty much understand the basics of binary.
Let’s now understand how to get the corresponding decimal values to the numbers which are not multiples of 2.

To get the total value of a binary number, add the values corresponding to each slot. So, for example, three in binary would be:
11

The above corresponds to three because if you add the total values of all the slots, that is to say a one from the slot to the right, and a two from the second slot to the right, then it equals three.

As another example, let’s say you want to represent 5 in binary terms. Then you would need a value of one to be added to a value of four, and you would not want a value of two:
101 [Reading from the right: 1(one) + 0(two) + 1(four) = five]

Here’s an additional example:
001011 [Reading from the right: 1(one) + 1(two) + 0(four) + 1(eight) + 0(sixteen) + 0(thirty-two) = eleven)



Exercises: What do the following equal in decimal terms?
a) 11011
b] 110
c) 010101
d) 10110

Answers:
a) 27
b] 6
c) 21
d) 22

If you got the above questions correct [without cheating], then you essentially understand the binary system. Understanding the binary system was the hard part. What follows is pretty easy.

3. Converting Binary to ASCII (Text)
ASCII is essentially the letters, numbers and symbols that are stored in our computers through the use of fonts. When the keyboard relays the buttons you pressed, it sends in a code which is then converted to the ASCII equivalent of “k” or “5” or whatever key you pressed.

Here’s an example of a message “hidden” in binary text:
0100100001100101011011000110110001101111

Now there are only so many letters, numbers and symbols stored for ASCII. Having sets of 8 digits for their binary equivalent is more than enough to represent all of these letters and the like. As such, all strings that represent text like in the above are separated into bits of 8 for simplicity:
01001000 01100101 01101100 01101100 01101111

Okay, so our example message was separated into 8 digit strings. The decimal value for each of these strings in the example was calculated for you.
01001000 = 72
01100101 = 101
01101100 = 108
01101100 = 108
01101111 = 111

The result was 72,101,108,108,111. Now, there is something called the ASCII table. It essentially corresponds to the binary numbers from yore to the equivalent letters/symbols/numbers. But since we found the decimal values of these binary strings, we can use a major shortcut.

By pressing ALT + [The Number], you will get the ASCII equivalent of that number. For example, by pressing the ALT key and at then (while keeping it down) the numbers 72 in any text editor, you will get the corresponding “H” to show up.

Let’s do so for the entire example message:
72 = H
101 = e
108 = l
108 = l
111 = o

So the entire “hidden” message translates to “Hello”.


Exercise: Decode the following message
01000011011011110110111001100111011100100110000101110100011101010110110001100001
011101000
1101001011011110110111001110011 00100001

Hint: The first step on your way to decoding the message (separated into bytes for you)
01000011 01101111 01101110 01100111 01110010 01100001 01110100 01110101 01101100 01100001 01110100 01101001 01101111 01101110 01110011 00100001

System Changes To Foil Hackers And Browser Hijackers

Hackers and Browser Hijacking is one area of the Net that affects everyone at some stage.

In addition to having third party utilities such as SpyBot, Anti Virus scanners and firewalls installed there are some changes that can be made to Windows 2000/XP. Below are some details to make your system safer from hackers and hijackers.

Some of these tips require editing of the Registry so it is wise to either backup the registry and/or create a Restore Point.

1. Clearing the Page File at Shutdown

Windows 2000/XP paging file (Sometimes called the Swap File) can contain sensitive information such as plaintext passwords. Someone capable of accessing your system could scan that file and find its information. You can force windows to clear out this file.

In the registry navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerMemory Management and add or edit the DWORD ClearPageFileAtShutdown. Set it to 1.

Note that when you do this, the system will take much longer to shut down: a system with a really big Page File (! Gig or more) may take a minute or two longer.

2. Disable the POSIX and OS/2 Subsystem.

Windows 2000 and XP come with little-documented subsystems it at allow compatibility with UNIX and OS/2 systems These rues systems are enabled by default but so rarely used that they are best off bring disabled completely to prevent possible service hijackings.

To disable these subsystems, open the registry and navigate to HKEY LOCAL MACHINESYSTEMCurrentControlSetControlSession ManagerSubSystems. Delete the subkeys Os2 and Posix. then reboot.

3. Never leave default passwords blank.

On installation, Windows 2000 sets up an Administrator account with total system access and prompts for a password. Guess what: by default, it allows that password to be blank. If a user doesn't want to type a password, he can simply click Next and the system will be an open door for anyone who wants to log on. Always opt for a password of some kind when setting up the default account on a machine.

4. Install Windows In a different directory.

Windows usually installs itself in the WINDOWS directory. Windows NT 4 0 and 2000 Will opt for WINNT. Many worms and other rogue programs assume this to be the case and attempt to exploit those folders files. To defeat this install Windows to another directory when you're setting it up - you can specify the name of the directory during setup. WINDIR is okay; so some people use WNDWS - A few (not that many) programs may not install properly if you install Windows to another folder but t hey are very few and they are far between

5. Fake out hackers with a dummy Administrator account

Since the default account in Windows 2000 is always named Administrator, an enterprising hacker can try to break into your system by attempting to guess the password on that account. It you never bothered to put a password on that account, say your prayers.

Rather than be a sucker to a hacker, put a password on the Administrator account it you haven't done so already. Then change the name of the Administrator account. You'll still be able to use the account under its new name, since Windows identifies user accounts by a back-end ID number rather than the name. Finally, create a new account named Administrator and disable it. This should frustrate any would -be break-ins.

You can add new accounts and change the names of existing accounts in Windows 2000 through the Local Users and Groups snap in. Right-click on My Computer, select Manager, open the Local Users and Groups subtree, look in the Users folder and right-click on any name to rename it. To add a new user, right-click on the containing folder and select New User. Finally, to disable an account, double-click it, check the Account is disabled box and click OK.

Don't ever delete the original Administrator account. Some programs refuse to install without it and you might have to log in under that account at some point to setup such software. The original Administrator account is configured with a security ID that must continue to be present in the system.

6. Disable the Guest account

Windows XP comes with a Guest account that's used for limited access, but it's still possible to do some damage with it. Disable it completely if you are not using it. Under Control Panel, select User Accounts, click on Guest Account and then select Turn Off the Guest Account.

7. Set the Hosts file to read-only to prevent name hijacking.

This one's from (and to a degree, for) the experts. The HOSTS file is a text file that all flavors of Windows use to hold certain network addresses that never change. When a network name and address is placed in HOSTS, the computer uses the address listed there for that network name rather than performing a lookup (which can take time). Experts edit this file to place their most commonly-visited sites into it, speeding things up considerably.

Unfortunately hijackers and hackers also love to put their own information into it - redirecting people from their favorite sites to places they don't want to go. One of the most common entries in HOSTS is local host which is set 1770.0.1. This refers to the local machine and if this entry is damaged the computer can behave very unpredictably.

To prevent HOSTS from being hijacked, set it to read-only. Go to the folder %Systemroot%system32driversetc, right-click on HOSTS, select Properties check the Read-Only box and click OK. If you want to add your own entries to HOSTS, you can unprotect it before doing so, but always remember to set it to read-only after you're done.

8. Disallow changes to IE settings through IE

This is another anti hijacker tip. IE can be set so that any changes to its settings must be performed through the Internet icon in the Control Panel, rather than through IE's own interface. Some particularly unscrupulous programs or sites try to tamper with setting by accessing the Tools, Options menu in IE. You can disable this and still make changes to IE's settings through the Control Panel.

Open the Registry and browse to HKEY_CURRENT_USER SoftwarePoliciesMicrosoftInternet ExplorerRestrictions. Create or edit a new DWORD value named NoBrowserUptions and set it to 1 (this is a per-user setting). Some third-party programs such as Spybot Search And Destroy allow you to toggle this setting.

You can also keep IE from having other programs rename its default startup page, another particularly annoying form of hijacking. Browse to HKEY.CURRENT USERSoftwarePolicies MicrosoftInternet ExploreControl Panel and add or edit a DWORD, Homepage and set it to 1.

9. Turn off unneeded Services

Windows 2000 and XP both come with many background services that don't need to he running most of the time: Alerter, Messenger, Server (If you're running a standalone machine with no file or printer shares), NetMeeting Remote Desktop Sharing, Remote Desktop Help Session Manager (the last two if you're not using Remote Desktop or NetMeeting), Remote Registry, Routing and Remote Access (if you're not using Remote Access), SSDP Discovery Service, Telnet, and Universal Plug and Play Device Host.

A good resource and instruction on which of these services can be disabled go to /http://www.blkviper.com/WinXP/

10. Disable simple File Shares.

In Windows XP Professional, the Simple File Sharing mode is easily exploited, since it’s a little too easy to share out a file across your LAN (or the NET at large). To turn it off, go m My Computer, click Tools, Folder Option and the View tab, and uncheck Use Simple file sharing (Recommended). Click OK. When you do this you can access the Security tab in the Properties window for all folders; set permissions for folders; and take ownership of objects (but not in XP Home)

Top Five Myths About Safe Surfing

Recently PC Magazine conducted a survey that asked participants to rate their broadband ISP services. We found out that many users don't completely understand the seriousness of potential threats or how to protect their PCs. The following are responses to the top five security misconceptions we encountered.

I don't keep important things on my PC, so I don't have to worry about security.


There was a time when this statement was partially true, but that time has long since passed. Current viruses, worms, and other threats, including the famous Love Bug, Nimda, and Blaster, spread blindly across the Internet to thousands or millions of PCs in a matter of hours, without regard for who owns them, what is stored there, or the value of the information they hold. The purpose of such attacks is nothing less than to wreak havoc. If you ignore the reality of these attacks, you are certain to be hit at one time or another. Even if your computer is not attacked directly, it can be used as a zombie to launch a denial-of-service or other attack on a network or to send spam or pornography to other PCs without being traced. Therefore, your civic responsibility is to protect your PC so that others are protected.

I can protect my PC if I disconnect from the Internet or turn it off when I'm not using it.

Wrong. If you connect to the Internet at all, you are a target. You could download a virus when you connect and not activate it until days later when you read your e-mail off-line. Even if you rarely connect to the Internet, you can get a virus from a file off of a network, floppy disk, or USB flash memory drive.

I can protect myself from viruses by not opening suspicious e-mail attachments.

Wrong again. The next virus you get may come from your best friend's or boss' computer if his e-mail address book was used to propagate an attack. Nimda and other hybrid worms can enter through the Web browser. And it is possible to activate some viruses simply by reading or previewing an e-mail. You simply must have a PC-based antivirus package.

I have a Macintosh (or a Linux-based system), not a Windows system, so I don't have to worry about being attacked.

It is true that most attacks target Microsoft Windows–based PCs, but there have been attacks against Mac OS and Linux systems as well. Some experts have predicted that the Mac virus problem will get worse, because Mac OS X uses a version of Unix. And although these systems have some useful security features, they can still be attacked.

My system came with an antivirus package, so I'm protected.

Not quite. First, if you haven't activated your antivirus package to scan incoming traffic automatically, you are not protected against e-mail and Web browser attacks. Second, new threats appear daily, so an antivirus package is only as good as its last update. Activate the auto-update features to stay on top of the latest threats. Third, an antivirus package can't protect you from every threat. In most cases you need a combination of solutions, including, at minimum, antivirus, a personal firewall such as Zone Labs' ZoneAlarm Pro, and a plan for keeping your operating system and software up to date with security patches. Antispyware and antispam utilities (such as PepiMK Software's SpyBot Search & Destroy and Norton AntiSpam 2004) will also help keep you safe.

Speed Up Your Bandwidth By 20%

Windows uses 20% of your bandwidth. Here's how to Get it back.

A nice little tweak for XP. Microsoft reserve 20% of your available bandwidth for their own purposes (suspect for updates and interrogating your machine etc..)

Here's how to get it back:

Click Start-->Run-->type "gpedit.msc" without the "

This opens the group policy editor. Then go to:


Local Computer Policy-->Computer Configuration-->Administrative Templates-->Network-->QOS Packet Scheduler-->Limit Reservable Bandwidth


Double click on Limit Reservable bandwidth. It will say it is not configured, but the truth is under the 'Explain' tab :

"By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default."

So the trick is to ENABLE reservable bandwidth, then set it to ZERO.

This will allow the system to reserve nothing, rather than the default 20%.

I have tested on XP Pro, and 2000
other o/s not tested.

Please give me feedback about your results

Set Google as your Default Search in IE

Google as your default search engine in IE.

Copy everything in the box below into NOTEPAD

CODE
REGEDIT4

[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main]
"Search Page"="http://www.google.com"
"Search Bar"="http://www.google.com/ie"

[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\SearchURL]
""="http://www.google.com/keyword/%s"

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Search]
"SearchAssistant"="http://www.google.com/ie"

1. Save the file as Google.reg
2. Double click to import to your registry.

Registry Disassembled

Registry Disassembled a basic tutorial

The registry is a hierarchical database that contains virtually all information about your computer's configuration. Under previous version of Windows, those setting where contained in files like config.sys, autoexec.bat, win.ini, system.ini, control.ini and so on. From this you can understand how important the registry is. The structure of the registry is similar to the ini files structure, but it goes beyond the concept of ini files because it offers a hierarchical structure, similar to the folders and files on hard disk. In fact the procedure to get to the elements of the registry is similar to the way to get to folders and files.
In this section I would be examing the Win95\98 registry only although NT is quite similar.

The Registry Editor
The Registry Editor is a utility by the filename regedit.exe that allows you to see, search, modify and save the registry database of Windows. The Registry Editor doesn't validate the values you are writing: it allows any operation. So you have to pay close attention, because no error message will be shown if you make a wrong operation.
To launch the Registry Editor simply run RegEdit.exe ( under WinNT run RegEdt32.exe with administer privileges).
The registry editor is divided into two sectios in the left one there is a hierarchical structure of the database (the screen looks like Windows Explorer) in the right one there are the values.

The registry is organized into keys and subkeys. Each key contains a value entry , each one has a name, a type or a class and the value itself. The name is a string that identifies the value to the key. The length and the format of the value is dependent on the data type.

As you can see with the Registry Editor, the registry is divided into five principal keys: there is no way to add or delete keys at this level. Only two of these keys are effectively saved on hard disk: HKEY_LOCAL_MACHINE and HKEY_USERS. The others are jusr branches of the main keys or are dynamically created by Windows.

HKEY_LOCAL_MACHINE
This key contains any hardware, applications and services information. Several hardware information is updated automatically while the computer is booting. The data stored in this key is shared with any user. This handle has many subkeys:

Config
Contains configuration data for different hardware configurations.
Enum
This is the device data. For each device in your computer, you can find information such as the device type, the hardware manufacturer, device drivers and the configuration.
Hardware
This key contains a list of serial ports, processors and floating point processors.
Network
Contains network information.
Security
Shows you network security information.
Software
This key contains data about installed software.
System
It contains data that checks which device drivers are used by Windows and how they are configured.

HKEY_CLASSES_ROOT
This key is an alias of the branch HKEY_LOCAL_MACHINE\Software\Classes and contains OLE, drag'n'drop, shortcut and file association information.

HKEY_CURRENT_CONFIG
This key is also an alias. It contains a copy of the branch HKEY_LOCAL_MACHINE\Config, with the current computer configuration.

HKEY_DYN_DATA
Some information stored in the registry changes frequently, so Windows maintains part of the registry in memory instead of on the hard disk. For example it stores PnP information and computer performance. This key has two sub keys

Config Manager
This key contains all hardware information problem codes, with their status. There is also the sub key HKEY_LOCAL_MACHINE\Enum, but written in a different way.
PerfStats
It contains performance data about system and network

HKEY_USERS
This important key contains the sub key .Default and another key for each user that has access to the computer. If there is just one user, only .Default key exists. . Each sub key maintains the preferences of each user, like the desktop colors, the fonts used, and also the settings of many programs. If you open a user subkey you will find five important subkeys:

AppEvent
It contains the path of audio files that Windows plays when some events happen.
Control Panel
Here are the settings defined in the Control Panel. They used to be stored in win.ini and control.ini.
Keyboard Layouts
It contains some advanced code which identifies the actual keyboard disposition how it is set into the Control Panel.
Network
This key stores subkeys that describe current and recent network shortcuts.
RemoteAccess
The settings of Remote Access are stored here.
Software
Contains all software settings. This data was stored in win.ini and private .ini files.

HKEY_CURRENT_USER
It is an alias to current user of HKEY_USERS. If your computer is not configured for multi-users usage, it points to the subkey .Default of HKEY_USERS.

Description of .reg file

Here I am assuming that you already have a .reg file on your hard disk and want to know more about how it is structured.Now do not double click the .reg file or it's content will be added to the registry, of course there will be warning message that pops up. Now to view the properties of the .reg file open it in notepad.
To do so first launch notepad by going to Start>Programs>Accessories>Notepad.
Then through the open menu open the .reg file.
Now the thing that differentiates .reg files from other files is the word REGEDIT4. It is found to be the first word in all .reg files. If this word is not there then the registry editor cannot recognize the file to be a .reg file.
Then follows the key declaration which has to be done within square brackets and with the full path.If the key does not exist then it will be created.
After the key declaration you will see a list of values that have to be set in the particular key in the registry.The values look like this:

"value name"=type:value

Value name is in double commas. Type can be absent for string values, dword: for dword values and hex: for binary values. For all other values you have to use the code hex(#): , where # indicate the API code of the type.
So:

"My string" = "string value" is a string
"My dword" = dword:123456789 is a dword
"My binary" = hex:AA,BB,CC is a standard binary
"My other type" = hex(2):AA,BB,00 is an expand string


Important Note: expand string has API code = 2 and extended string has API code = 7.

As you can see, strings are in double quotes, dword is hexadecimal and binary is a sequence of hexadecimal byte pairs, with a comma between each. If you want to add a back slash into a string remember to repeat it two times, so the value "c:\Windows" will be "c:\\Windows".
Before write a new .reg file, make sure you do this else you will get an error message.

Command Line Registry Arguments

FILENAME.REG to merge a .reg file with the registry
/L:SYSTEM to specify the position of SYSTEM.DAT
/R:USER to specify the position of USER.DAT
/e FILENAME.REG [KEY] to export the registry to a file. If the key is specified, the whole branch will be exported.
/c FILENAME.REG to substitute the entire registry with a .reg file
/s to work silently, without prompt information or Warnings.

That wraps up the Windows Registry.